If one unit cools fine alone but both weaken when running together, the cause can be load sharing, distribution, or system performance limits.
These are likely causes for this symptom. Compare them with what you are seeing now to narrow it down. This is indicative only. To confirm the problem, contact us.
With two rooms active, available cooling must be shared. During higher room load, both rooms can feel weaker.
Solution: We verify normal load-sharing behavior first before assigning fault causes.
Remarks: A shared-demand pattern is not always a hardware failure.
If flow distribution is uneven, one room may keep more cooling while the other falls off quickly. The gap becomes obvious in dual operation.
Solution: We check distribution behavior and indoor balance before larger system assumptions.
Remarks: Treating imbalance as a single-part failure too early can miss the real path.
A weak compressor or control path can cope with light demand but fail under combined indoor load.
Solution: We test multi-load behavior and identify the root limit before recommending scope.
Remarks: Approving broad replacement without multi-load checks can overshoot the needed fix.
Different room heat load and size can make cooling look uneven when both rooms are active.
If this pattern keeps worsening, move to diagnosis early.
Just observe, no disassembly required:
Cooling drop is usually diagnosis-level unless safety signs appear.
Same situation with your aircon?
Describe what's happening. We'll work out the likely cause and tell you the right next step.
Describe it on WhatsApp